Our new renewable fuel
bp bioenergy HVO is a renewable, lower carbon fuel that is chemically similar to the paraffinic components in conventional diesel and meets the paraffinic diesel fuel specification, BS EN 15940*. It’s produced from renewable, waste-derived feedstocks. The feedstocks are hydrotreated and then further processed to produce the finished fuel.
bp bioenergy HVO delivers a well-to-wheel CO2e emissions saving of at least 85% compared to fossil diesel*
*We calculate the CO2e emissions saving from fuel production to end use by the customer (‘Well-to-Wheel’) in accordance with the 2024 RTFO Compliance Guidance (Section 8), on a mass balance basis using the reference value 94 g CO2e/MJ for fossil fuels. For more information see ‘About the CO2e emissions saving’ below. bp bioenergy HVO is produced from waste-derived feedstocks of biological origin that meet the requirements of a renewable transport fuel for the purposes of The Energy Act 2004 and the Renewable Transport Fuel Obligations Order 2007.
bp is here for fleets’ needs - today mainly with diesel and petrol but now with HVO at selected sites.
We’re investing in today’s energy system, which is mainly oil and gas – and, not or – in our transition and the energy transition. And while we’re mostly in oil and gas today, we’ve increased global investment in our lower carbon, convenience stores and power trading businesses (what we call our ‘transition growth engines’) from around 3% in 2019 to around 23% in 2023.
About the CO2e emissions saving
How we calculate it
Our claim is the ‘well-to-wheel’ (i.e. from the generation of the feedstocks through production to end-use by the customer) CO2e emissions saving for bp bioenergy HVO on a mass balance basis compared to fossil diesel.
We have chosen to use the energy-based methodology outlined in the 2024 RTFO Compliance Guidance (Section 8) to calculate the emissions savings. The actual CO2e values of the product are taken from certified Proof of Sustainability (PoS) documents issued by a scheme such as ISCC that is accepted by the Department of Transport for the purposes of RTFO compliance. The RTFO requires the use of a ‘mass balance’ (i.e. units in-units out) methodology and savings are calculated using a fossil fuel reference value of 94 gCO2e/MJ, which is the default value referenced in the RTFO 2024 compliance guidance.
The CO2e emissions saving from bp bioenergy HVO will always be at least 85% on a mass balance basis. The actual CO2e emissions saving may vary for different portions of bp bioenergy HVO, depending on the origin and supply chain of the raw materials used to produce it. This means that when different amounts of HVO with varying CO2e emissions savings are mixed together, the overall CO2e emissions saving for the mixture will be at least 85%. For example, if you mix 10KT of HVO with a 90% CO2e emissions saving with 10KT of HVO with an 80% CO2e emissions saving, the resulting 20KT batch will have an 85% CO2e emissions saving.
The calculation for the saving is as follows:
% CO2e emissions saving = (EFF –ERF) / EFF x 100
ERF = total emissions from the renewable fuel
EFF = total emissions from fossil fuel comparator
Sometimes this approach to expressing CO2e emissions savings is described as being on a “lifecycle basis”. Using bp bioenergy HVO does not mean a reduction in carbon dioxide (CO2) emissions at the vehicle tailpipe. As with diesel, the combustion of bp bioenergy HVO leads to CO2 – and other emissions - at the vehicle tailpipe. However, standard carbon accounting practices do not include emissions from the combustion of renewable fuels because they are not net contributors to atmospheric CO2 levels over the fuel lifecycle.
What the ‘e’ means in CO2e
‘e’ stands for equivalent. Carbon dioxide (CO2) is not the only greenhouse gas (GHG); also associated with fuel production and combustion are other GHGs such as oxides of nitrogen (NOx) and methane (CH4) which can be emitted in minor amounts. In accordance with standard reporting practices, the emissions of all these GHGs are totalled and expressed in carbon dioxide equivalent (CO2 equivalent or CO2e) terms with reference to their global warming potential.
Why we compare against fossil diesel when B7 diesel, which contains biodiesel, is on sale
B7 (which is diesel that meets the EN 590 fuel specification) includes up to 7% biodiesel (usually FAME – fatty acid methyl ester) and fossil diesel. There is no standard reference value for B7 diesel unlike fossil fuel, therefore, when calculating the CO2e emissions savings for renewable fuels, it is common industry practice to use the standard fossil fuel reference (94 gCO2e/MJ) for comparison and why we have used it to calculate the CO2e saving for bp bioenergy HVO.
The table below demonstrates how the CO2e saving varies with different comparator fuels, using reasonable assumptions as to average biodiesel type and content in B7 diesel in a country in a particular year. This shows that the CO2e saving is very similar when comparing bp bioenergy HVO to B7 diesel and to fossil fuel.
Fuel | Carbon Intensity (gCO2e/MJ) | HVO Comparative Saving (%) |
|---|---|---|
bp bioenergy HVO (maximum value) | 14.1 | N/A |
Fossil diesel (no biodiesel) | 94 | 85 |
B7 diesel with 7% RME biodiesel | 91.1 | 84.5 |
Average UK diesel 2022 (4.2% RME biodiesel) | 92.3 | 84.7 |
Designed with convenience in mind
bp bioenergy HVO can be used as a drop-in replacement for diesel in many existing vehicles. It can be used alone or mixed with the diesel in your tank. Trucks approved by the manufacturer to use EN 15940 fuels can start using bp bioenergy HVO right away, with no modification or new equipment required*.
It’s that simple. So, you can start enjoying the benefits of bp bioenergy HVO without delay.
*Suitable for vehicles and engines approved by the manufacturer to use EN 15940 fuels in accordance with the manufacturer’s guidelines.
With bp bioenergy HVO you can:
Drive down your carbon emissions
bp bioenergy HVO delivers a well-to-wheel CO2e emissions saving of at least 85% compared to fossil diesel*
*We calculate the CO2e emissions saving from fuel production to end use by the customer
(‘Well-to-Wheel’) in accordance with the 2024 RTFO Compliance Guidance (Section 8), on a mass balance basis using the reference value 94 g CO2e/MJ for fossil fuels. For more information see ‘About the CO2e emissions saving’ above. bp bioenergy HVO is produced from waste-derived feedstocks of biological origin that meet the requirements of a renewable transport fuel for the purposes of The Energy Act 2004 and the Renewable Transport Fuel Obligations Order 2007.
Get started today
bp bioenergy HVO is a waste-derived biofuel that can be used as a direct substitute for diesel in trucks approved by the manufacturer to use EN 15940 fuels*. So, there’s no need to adapt existing vehicles or buy new ones.
*Suitable for vehicles and engines approved by the manufacturer to use EN 15940 fuels in accordance with the manufacturer’s guidelines.
Use alone or mixed with diesel
bp bioenergy HVO can be used interchangeably with diesel. Drivers of trucks compatible with EN 15940 fuels can confidently use bp bioenergy HVO alone or mixed with the diesel in their tank*.
*Suitable for vehicles and engines approved by the manufacturer to use EN 15940 fuels in accordance with the manufacturer’s guidelines.
Benefit all year round
bp bioenergy HVO is designed to keep working in colder weather throughout the year. With a Cold Filter Plugging Point (CFPP) of -15°C maximum, it meets the same low temperature requirement as UK winter diesel (BS EN 590) but all year round.
Protect your fleets’ engines with ACTIVE technology
bp bioenergy HVO with ACTIVE technology helps clean and protect engines, thanks to our innovative ACTIVE technology formula which is designed to remove existing harmful deposits from critical engine parts and prevent them from building up.
How can I get started?
In Q1 2024, bp is launching bp bioenergy HVO from the following four bp forecourts with more being added throughout 2024.
Brampton Hut (A1)
Reading West Services (M4)
Michaelwood North Services (M5)
Stafford Services (M6)
To find out more, contact one of the bp fleet solutions account management team.
Talk to a fleet expertFAQs
Our claim is the ‘well-to-wheel’ (i.e. from the generation of the feedstocks through production to end-use by the customer) CO2e emissions saving for bp bioenergy HVO on a mass balance basis compared to fossil diesel.
We have chosen to use the energy-based methodology outlined in the 2024 RTFO Compliance Guidance (Section 8) to calculate the emissions savings. The actual CO2e values of the product are taken from certified Proof of Sustainability (PoS) documents issued by a scheme such as ISCC that is accepted by the Department of Transport for the purposes of RTFO compliance. The RTFO requires the use of a 'mass balance’ (i.e. units in-units out) methodology and savings are calculated using a fossil fuel reference value of 94 gCO2e/MJ, which is the default value referenced in the RTFO 2024 compliance guidance.
The CO2e emissions saving from bp bioenergy HVO will always be at least 85% on a mass balance basis. The actual CO2e emissions saving may vary for different portions of bp bioenergy HVO, depending on the origin and supply chain of the raw materials used to produce it. This means that when different amounts of HVO with varying CO2e emissions savings are mixed together, the overall CO2e emissions saving for the mixture will be at least 85%. For example, if you mix 10KT of HVO with a 90% CO2e emissions saving with 10KT of HVO with an 80% CO2e emissions saving, the resulting 20KT batch will have an of 85% CO2e emissions saving.
The calculation for the saving is as follows:
% CO2e emissions saving = (EFF – ERF) / EFF x 100
ERF = total emissions from the renewable fuel
EFF = total emissions from fossil fuel comparator
Sometimes this approach to expressing CO2e emissions savings is described as being on a “lifecycle basis”. Using bp bioenergy HVO does not mean a reduction in carbon dioxide (CO2) emissions at the vehicle tailpipe. As with diesel, the combustion of bp bioenergy HVO leads to CO2 – and other emissions - at the vehicle tailpipe. However, standard carbon accounting practices do not include emissions from the combustion of renewable fuels because they are not net contributors to atmospheric CO2 levels over the fuel lifecycle.
The UK RTFO Order describes “mass balance” as a system of calculation which— (a) allows amounts of relevant feedstock or fuel with different sustainability characteristics to be mixed (“the mixture”); (b) provides for the sustainability characteristics of amounts added to the mixture to be attributed to other amounts withdrawn from the mixture; and (c) requires the sustainability characteristics attributed to the sum of the amounts withdrawn from the mixture to be the same, and in the same quantities, as the sustainability characteristics attributed to the sum of the amounts added to the mixture.
‘e’ stands for equivalent. Carbon dioxide (CO2) is not the only greenhouse gas (GHG); also associated with fuel production and combustion are other GHGs such as oxides of nitrogen (NOx) and methane (CH4) which can be emitted in minor amounts. In accordance with standard reporting practices, the emissions of all these GHGs are totalled and expressed in carbon dioxide equivalent (CO2 equivalent or CO2e) terms with reference to their global warming potential.
B7 (which is diesel that meets the EN 590 fuel specification) includes up to 7% biodiesel (usually FAME – fatty acid methyl ester) and fossil diesel. There is no standard reference value for B7 diesel unlike fossil fuel, therefore, when calculating the CO2e emissions savings for renewable fuels, it is common industry practice to use the standard fossil fuel reference (94 gCO2e/MJ) for comparison and why we have used it to calculate the CO2e savings for bp bioenergy HVO.
The table below demonstrates how the CO2e saving varies with different comparator fuels, using reasonable assumptions as to average biodiesel type and content in B7 diesel in a country in a particular year. This shows that the CO2e saving is very similar when comparing bp bioenergy HVO to B7 diesel and to fossil fuel.
Fuel | Carbon Intensity (gCO2e/MJ) | HVO Comparative Saving (%) |
|---|---|---|
bp bioenergy HVO (maximum value) | 14.1 | N/A |
Fossil diesel (no biodiesel) | 94 | 85 |
B7 diesel with 7% RME biodiesel | 91.1 | 84.5 |
Average UK diesel 2022 (4.2% RME biodiesel) | 92.3 | 84.7 |
No. As with diesel, the combustion of bp bioenergy HVO leads to carbon dioxide (CO2) – and other emissions - at the vehicle tailpipe. However, standard carbon accounting practices do not include emissions from the combustion of renewable fuels because they are not net contributors to atmospheric CO2 levels over the fuel lifecycle.
bp bioenergy HVO is a lower carbon* type of diesel fuel made from renewable, waste-derived raw materials of biological origin, such as used cooking oil. It complies with the paraffinic diesel fuel standard BS EN 15940.
*‘Well-to-Wheel’ basis (i.e. from fuel production to end-use by the customer). CO2e saving (at least 85%) compared to fossil fuels is calculated on a mass balance basis in accordance with 2024 RTFO Compliance Guidance. bp bioenergy HVO is produced
from waste-derived feedstocks of biological origin that meet the requirements of a renewable transport fuel for the purposes of The Energy Act 2004 and the Renewable Transport Fuel Obligations Order 2007.
HVO stands for Hydrotreated Vegetable Oil.
bp bioenergy HVO is a renewable fuel*, meeting the BS EN 15940 paraffinic diesel fuel specification, and is a direct substitute for diesel. It’s a ‘drop-in’ fuel that can be used today in HVO compatible vehicles** without any modifications or the need to buy new vehicles, and offers a range of benefits to fleets:
Delivers a well-to-wheel CO2e emissions saving of at least 85% calculated on a mass balance basis compared to fossil diesel***
If bp bioenergy HVO isn’t available the next time you refuel, you can top-up with diesel. bp bioenergy HVO can also be used interchangeably with diesel.**
Year-round use – with a Cold Filter Plugging Point of -15°C maximum, it meets the same low temperature requirement as UK winter diesel (BS EN 590) but throughout the year.
It’s specially formulated to help clean and protect engines, thanks to our innovative ACTIVE technology formula, which is designed to remove existing harmful deposits from critical engine components and prevent them from building up.
bp bioenergy HVO is produced from waste-derived feedstocks of biological origin that meet the requirements of a renewable transport fuel for the purposes of The Energy Act 2004 and the Renewable Transport Fuel Obligations Order 2007.
bp bioenergy HVO meets the BS EN 15940 specification and can be used in diesel vehicles without any modifications, provided the vehicle is approved by the manufacturer to use EN 15940 fuels and it is used in accordance with manufacturer’s guidelines. To show this, as required by legislation, bp bioenergy HVO fuel pumps will display an ‘XTL’ label. From October 2018, manufacturers should have included a corresponding ‘XTL’ label on the fuel tank of vehicles approved to use HVO. Vehicles manufactured before this date may be compatible with bp bioenergy HVO but won’t be labelled. If in any doubt about HVO compatibility, please consult your vehicle manufacturer prior to use.
bp bioenergy HVO will only be available in HGV lanes, on high-speed HGV pumps and at limited bp sites; it is not being sold at the retail forecourt pumps for passenger cars.
BS EN 16942 specifies how fuel pumps and nozzles must be labelled to denote the fuel type. Additionally, these labels are also required to be present on the vehicle’s fuel filler cap or tank to show fuel compatibility.
The identifier for HVO – and other paraffinic diesel fuels - is XTL:
X is a variable to represent the starting energy source used for the fuel
TL = To Liquid
The nozzle and hose will be the same as for diesel, although there will be a different colour for the product branding at the pump, as well as ‘XTL’ labelling as required by legislation. There will also be a talking pump to announce that you have picked up the nozzle for bp bioenergy HVO.
If in any doubt about vehicle compatibility with HVO, please consult the manufacturer prior to use.
Provided your vehicle is approved by the manufacturer to use EN 15940 fuels and it is used in accordance with the manufacturer’s guidelines, you can use bp bioenergy HVO interchangeably with diesel or mixed with diesel already in your vehicle tank. If in any doubt about vehicle compatibility with HVO, please consult the manufacturer prior to use.
No, although both HVO and e-fuels can be classified as XTL (X-to-Liquid) fuels. E-fuels, also called synfuels, are fuels that are synthesized entirely from hydrogen and carbon dioxide. HVO, on the other hand, is produced from renewable, waste-derived materials. When biomass is used as the feedstock, HVO is also known as a BTL (Biomass-to-Liquid) fuel.
Customers can sign up to receive a Biofuels Information Sheet (BIS) from bp that shows the amount of CO2e/CO2 emissions savings they have achieved compared to fossil diesel based upon bp bioenergy HVO purchases made using a fuel card. BISs can be provided on a quarterly basis.
bp bioenergy HVO will only be available in HGV lanes on the high-speed pumps at limited bp sites; it is not being sold at the retail forecourt pumps for passenger cars.
We’re currently piloting bp bioenergy HVO at 4 sites in the UK, with further sites planned in the next few months in the UK and across Europe.
Customers can download our site list, which is within the downloads section of our website.
There may be a minor increase in volumetric fuel consumption for bp bioenergy HVO compared to BS EN 590 diesel on a like-for-like basis due to HVO’s lower energy density.
Drivers can use bp bioenergy HVO all year round. It meets the same low temperature requirement as UK winter diesel (BS EN 590) with a Cold Filter Plugging Point (CFPP) of -15°C maximum, but throughout the year.
ACTIVE technology is the name we give to our innovative engine cleaning and protection formula that’s contained in bp bioenergy HVO. It’s designed to remove existing harmful deposits from critical engine components, such as fuel injectors, and prevent them from building up. Clean engines can work as the manufacturer intended.
bp bioenergy HVO is only suitable for vehicles and engines approved by the manufacturer to use EN 15940 fuels in accordance with the manufacturer’s guidelines. You should check with your manufacturer what actions you should take if you have mistakenly refuelled with bp bioenergy HVO and your vehicle is not approved to use EN 15940 fuels.
We're investing in today's energy system, which is mainly oil and gas – and, not or – in our transition and the energy transition. And while we’re mostly in oil and gas today, we’ve increased global investment in our lower carbon, convenience stores and power trading businesses (what we call our ‘transition growth engines’) from around 3% in 2019 to around 30% in 2022.
You can find out more here.